logo
Products
Backplane connector
European socket
Internet Connector
RJ45
Product Center
4410-2XXMG1FEBW01 FemaleH10.5
4410-2XXMG1FEBW01 FemaleH10.5
4410-2XXMG1FEBW01 FemaleH10.5
4410-2XXMG1FEBW01 FemaleH10.5
4410-2XXMG1FEBW01 FemaleH10.5
4410-2XXMG1FEBW01 FemaleH10.5
4410-2XXMG1FEBW01 FemaleH10.5
4410-2XXMG1FEBW01 FemaleH10.5
4410-2XXMG1FEBW01 FemaleH10.5
4410-2XXMG1FEBW01 FemaleH10.5
4410-2XXMG1FEBW01 FemaleH10.5
4410-2XXMG1FEBW01 FemaleH10.5
4410-2XXMG1FEBW01 FemaleH10.5
4410-2XXMG1FEBW01 FemaleH10.5
4410-2XXMG1FEBW01 FemaleH10.5
4410-2XXMG1FEBW01 FemaleH10.5
4410-2XXMG1FEBW01 FemaleH10.5
4410-2XXMG1FEBW01 FemaleH10.5

4410-2XXMG1FEBW01 FemaleH10.5

4410-2XXMG1FEBW01 FemaleH10.5,2.0mm,female,SMT,90°

Overview
Engineering Data
Product Certification
Engineering Drawing
Download

Card Edge connector

Card Edge connector is computer hardware, such as between the memory module and the memory socket, and between the graphics card and the graphics card socket. All signals are transmitted through Card Edge connector. Card Edge connector is composed of many golden yellow conductive contacts. Because its surface is plated with gold and the conductive contacts are arranged like fingers, it is called "golden finger". The gold finger is actually coated with a layer of gold on the copper clad laminate through the electroplating process, because the gold has strong oxidation resistance, can protect the internal circuit from corrosion, and has strong conductivity, and will not cause signal loss. At the same time, the gold has very strong ductility, which can make the contact area between contacts larger under appropriate pressure, so as to reduce the contact resistance and improve the signal transmission efficiency. Because the coating thickness is only a few tens of microns, it is very easy to wear. Therefore, it should be avoided to insert and unplug the original with Card Edge connector under unnecessary conditions to prolong the service life.All data streams and electronic streams of the memory processing unit are exchanged with the PC system through the contact between Card Edge connector and the memory socket. It is the output and input port of the memory. Therefore, its manufacturing process is very important for the memory connection.



Underlying parameter

JiLN Material Code4410-2XXMG1FEBW01 母头H10.5
Category Card Edge Connector
High10.5mm
TypeFemale
Foot width9.6mm
PositioningWith Positioning Φ1.0H1.2
CoverWithout Cover
DegreeSMT
Pin Num.2X13/20/23/25/27/32Pin Num.


Engineering parameters

Rated Current(Power)3AMP
Contact Resistance20mΩ Max
Insulation Resistance1000mΩ Min
Withstand Voltage1000AC/minute
Operating Temperature-40-105° C
Contact MaterialPhosphor Bronze
Contact PlactingAu or Sn Over Ni
Insulator MaterialPolyester(UL94V-0 )
Standard MaterialPA9T
Max. Processing Temp.230° C for 30-60 seconds             
260° C for 10 seconds


工程图

4410-2XXMG1FEBW01 FemaleH10.5

4410-2XXMG1FEBW01 FemaleH10.5,2.0mm,female,SMT,90°

Format:PDF

Date:2022-4-23